Black & Decker PRO 5.5 Instruction Manual

Airless sprayer. power paint sprayer
Hide thumbs

Advertisement

PLEASE READ AND SAVE THIS INSTRUCTION MANUAL
Airless Sprayer
MODEL PRO 5.5
POWER PAINT SPRAYER
WARNING TO REDUCE THE RISK OF INJURY, USER MUST
READ AND UNDERSTAND INSTRUCTION MANUAL.
FOR HOUSEHOLD USE ONLY.
KEEP CHILDREN AWAY FROM WORKING AREA.
For Customer Service Call:
1-800-264-5442 or 763-780-5115,
8 a.m. to 5 p.m. CST.
Made in Taiwan
Rociador sin aire
MODELO PRO 5.5
ROCIADOR DE PINTURA
POTENTE
ADVERTENCIA PARA DISMINUIR LOS RIESGOS DE
LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL
DE INSTRUCCIONES.
SÓLO PARA USO DOMÉSTICO.
MANTENGA A LOS NIÑOS LEJOS DEL ÁREA DE TRABAJO.
Para comunicarse con el dpto. de servicio al cliente, llame al:
1-800-264-5442 ó 763-780-5115, 8 a.m. a 5 p.m.
(hora del Centro de EE.UU.).
Hecho en Taiwán
AIRLESS SPRAYER PRO 5.5
Pulvérisateur sans air
comprimé
MODÈLE PRO 5.5
PULVÉRISATEUR À PEINTURE
ÉLECTRIQUE
AVERTISSEMENT POUR RÉDUIRE LES RISQUES DE
BLESSURE, L'UTILISATEUR DOIT LIRE ET COMPRENDRE LE
MANUEL D'INSTRUCTION.
DESTINÉ À UN USAGE MÉNAGER SEULEMENT.
TENEZ LES ENFANTS ÉLOIGNÉS DE L'AIRE DE TRAVAIL.
Pour le service à la clientèle, appelez au :
1-800-264-5442 ou 763-780-5115, de 8h00 à 17h00,
heure normale du Centre.
Fabriqué à Taïwan
ENGLISH • ESPAÑOL • FRANÇAIS 1

Advertisement

loading

  Summary of Contents for Black & Decker PRO 5.5

  • Page 1 Pour le service à la clientèle, appelez au : (hora del Centro de EE.UU.). 1-800-264-5442 ou 763-780-5115, de 8h00 à 17h00, Hecho en Taiwán heure normale du Centre. Fabriqué à Taïwan AIRLESS SPRAYER PRO 5.5 ENGLISH • ESPAÑOL • FRANÇAIS 1...
  • Page 2: Table Of Contents

    CLEAN UP AND LUBRICATION ..................................9 Model PRO 5.5 Step One Clean Up Instructions............................9 Model PRO 5.5 Step Two Clean Up Instructions for the Cylinder Housing ....................9 Model PRO 5.5 Petroleum Oil Instructions ..............................9 FLEXIBLE EXTENSION AND SUCTION TUBE KIT ............................10 Model PRO 5.5 Using the Flexible Extension ............................10...
  • Page 3: Important Safeguards

    • Have fire extinguishing equipment present and in good working wiring and causing electric shock. order. • Follow safety instructions and IMPORTANT SAFEGUARDS of material manufacturers. AIRLESS SPRAYER PRO 5.5 ENGLISH 3...
  • Page 4: Hazard: Hazardous Vapors

    Whenever the adapter is used, it must be held in place by a metal screw. AIRLESS SPRAYER PRO 5.5 ENGLISH 4...
  • Page 5: Fast Start Quick Reference Guide

    FAST START QUICK REFERENCE GUIDE This is only a quick reference for the Black&Decker® MODEL PRO 5.5 Sprayer. Read the entire instruction manual how-to use prior to product use. Spraying Instructions SKIN INJECTION HAZARD RISK OF EXPLOSION OR FIRE HAZARDOUS VAPORS Read all warnings and safety Mix material thoroughly.
  • Page 6: Model Pro 5.5 How-To Use

    MODEL PRO 5.5 HOW TO USE Model PRO 5.5 Parts List Item Part No. Description Qty. C816694 Spray Tip, 0.6mm (Medium Duty/Regular Latex) — C816741 Spray Tip, 0.4mm — (Stain & Thinned Latex) C816713 Atomizer Valve C816698 Cylinder Housing C816550...
  • Page 7: Model Pro 5.5 Practice First

    6. Keep a stiff wrist. Do not arch your wrist at the beginning or the end of the stroke. Do not stop the motion of the unit while spraying. The path of the MODEL PRO 5.5 must pass beyond the area being stained and the Switch must be triggered on and off as the MODEL PRO 5.5 passes into and out of the spraying area.
  • Page 8: Model Pro 5.5 Spraying Instructions

    4. If the spray pattern is still not correct, please refer to MODEL PRO 5.5 TROUBLESHOOTING. 5. Hold the MODEL PRO 5.5 10-12 inches from the surface to be stained or painted. Keep the MODEL PRO 5.5 parallel to the ground without pointing it up or down. See Figure F.
  • Page 9: Clean Up And Lubrication

    Pump Housing, See Figure J. 6. Press the Switch of the MODEL PRO 5.5 for 3 to 5 seconds while the MODEL PRO 5.5 is still turned upside down. This will cause the Petroleum Oil to go onto the Piston and will protect the MODEL PRO 5.5 from drying and seizing of the Piston.
  • Page 10: Flexible Extension And Suction Tube Kit

    NOTE: To reduce the time the MODEL PRO 5.5 runs without paint or stain, hold the MODEL PRO 5.5 below the fluid level when priming. This will speed up the time the paint or stain is drawn through the tube. The paint/stain may need additional thinning if the sprayer will not prime.
  • Page 11: Troubleshooting

    •Pour paint through paint strainer. •Worn Atomizer Valve. •Replace Atomizer Valve. Excessive over spray (fogging) •MODEL PRO 5.5 too far •Move MODEL PRO 5.5 closer to from surface. to surface. •Pressure too high. •Adjust Volume Control Knob. •Worn Spray Tip.