Download  Print this page

Advertisement

HVLP SMARTSELECT
SPRAYER
TM
INSTRUCTION MANUAL
Catalog Number
BDPH400
Thank you for choosing Black & Decker! Go to
www.BlackandDecker.com/NewOwner to register your new product.
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your Black & Decker purchase, go to
WWW.BLACKANDDECKER.COM/INSTANTANSWERS for instant answers 24 hours a day.
If you canʼt find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an agent.
Please have the catalog number available when you call.
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

Advertisement

   Also See for Black & Decker HVLP SMARTSELECT BDPH400

   Summary of Contents for Black & Decker HVLP SMARTSELECT BDPH400

  • Page 1

    HVLP SMARTSELECT SPRAYER INSTRUCTION MANUAL Catalog Number BDPH400 Thank you for choosing Black & Decker! Go to www.BlackandDecker.com/NewOwner to register your new product. PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON: If you have a question or experience a problem with your Black & Decker purchase, go to WWW.BLACKANDDECKER.COM/INSTANTANSWERS for instant answers 24 hours a day.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Safety Guidelines - Definitions ...............3 Important Safety Instructions .................3 General Safety Warnings ................4 Grounding Instructions ...................4 Extension Cords.....................4 Components....................5 Set-Up ......................6 Aligning Pickup Tube...................6 Attaching Air Hose..................6 Material Preparation..................6 Thinning Table.....................7 Preparation Tips ..................7 Filling The Canister ..................7 Operation .......................7 On/Off Switch ....................7 SmartSelect Nozzle..................8...

  • Page 3: Safety Guidelines - Definitions

    SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. DANGER: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

  • Page 4: General Safety Warnings

    ELECTRIC SHOCK HAZARD. May cause severe injury. WARNING: To avoid these risks, take the following preventions • Keep electrical cord plug and spray gun trigger free from spray material and other liquids. Never hold cord at plug connections to support cord. Failure to observe may result in an electrical shock. •...

  • Page 5: Components

    COMPONENTS FUNCTIONAL DESCRIPTION 1.) Power unit 2.) Sprayer 3.) Side fill canister 4.) O-ring 5.) Pickup tube 6.) Check valve 7.) Lid 8.) Smart Select nozzle 9.) Tip collar 10.) Spray nozzle 11.) Spray tip 12.) Trigger 13.) Variable flow indicator 14.) Flow control knob 9 10 11...

  • Page 6: Set-up

    SET-UP Be sure to use appropriate protective gear and unplug unit. WARNING: Make sure area is well ventilated and free of flammable vapors. WARNING: ALIGNING THE PICKUP TUBE - (FIGURES B AND B1) The pickup tube can be aligned in the direction that you will be doing the most spraying to help minimize the amount of times that you will have to refill the canister.

  • Page 7: Thinning Table

    • If material needs thinning, add the appropriate liquid thinning material recommended by the manufacturer (figure D2). • It is possible to spray latex paint with this unit, however, the required thinning may exceed material manufacturerʼs recommendation. Thin latex paint so that it runs through viscosity cup in under 2 minutes.

  • Page 8: Smartselect Nozzle

    SMART SELECT NOZZLE SELECTION - (FIGURE G) There are three spray patterns to choose from. They are marked as 1, 2 and 3 on the Smart Select label located on the top of the sprayer (figure G). To select pattern number 1, turn the spray nozzle and align the green indicator on the spray nozzle with the number 1 on the label (figure G1).

  • Page 9: Cleaning

    • To get an even spray distribution, always keep your arm at the same distance (figure I) from the surface you are spraying and avoid moving your wrist (figure J). • Maintain smooth and consistent speed which will help avoid inconsistencies.

  • Page 10: Maintenance

    • Unscrew the tip collar and remove the spray nozzle and spray tip. Clean all parts with the cleaning brush in the appropriate cleaning solution (figure O). • If using water based material, clean the sprayer by running water through pickup tube inlet as shown in figure P.

  • Page 11: Service Information

    SERVICE INFORMATION All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools—Electric"...

Comments to this Manuals

Symbols: 0
Latest comments: