Download  Print this page

Advertisement

HVLP200

Advertisement

   Summary of Contents for Black & Decker HVLP200

  • Page 1 HVLP200...
  • Page 6: Intended Use

    ENGLISH (Original instructions) Intended use e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord Your Black & Decker floor based fine spray system is suitable for outdoor use reduces the risk of electric shock. intended for atomising solvent based and water based paints, f.
  • Page 7 (Original instructions) ENGLISH c. Disconnect the plug from the power source and/or the Do not use caustic (alkali) self heating or corrosive (acid) battery pack from the power tool before making any liquids in this sprayer as these can corrode metal parts or adjustments, changing accessories, or storing power weaken hose and seals.
  • Page 8: Electrical Safety

    ENGLISH (Original instructions) Residual risks. Additional residual risks may arise when using the tool which Warning! Wear a respirator or mask. may not be included in the enclosed safety warnings. These & risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations Warning! Use only non-flammable liquids.
  • Page 9 (Original instructions) ENGLISH Note: Ensure that the locking ring is tight and that the side fill canister is firmly secured in place. Switching on and off Aligning the pickup tube (fig. B & C) The sprayer is turned on and off with the spray trigger. The pickup tube can be aligned in the direction that you will be To turn the sprayer on, squeeze the spray trigger (2).
  • Page 10 ENGLISH (Original instructions) Note : Always test the spray pattern on scrap cardboard Thinning table or similar material first. Begin with flow control knob on the highest flow setting. If less flow is desired, dial the flow control Spray material Runout time knob in.
  • Page 11: Maintenance And Cleaning

    (Original instructions) ENGLISH Maintain smooth and consistent speed which will help Cleaning the sprayer (fig. O - S) avoid inconsistencies. Begin spraying after the pass has Disconnect the sprayer from the power supply. begun and release trigger before stopping the pass. Remove the side fill canister (6) and unscrew the side Avoid spraying too heavily in any one area.
  • Page 12: Ec Declaration Of Conformity

    Mains plug replacement (U.K. & Ireland only) Technical data If a new mains plug needs to be fitted: Safely dispose of the old plug. HVLP200 Connect the brown lead to the live terminal in the new (Type 1) plug. Voltage Connect the blue lead to the neutral terminal.
  • Page 13 (Original instructions) ENGLISH Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
  • Page 14 TYP. HVLP200 www.2helpU.com E16493 09 - 09 - 11...
  • Page 15 ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
  • Page 16 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...

This manual also for:

Hvlp400

Comments to this Manuals

Symbols: 0
Latest comments: