Wiring - Harbor Breeze 41239 Manual

WIRING

WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires
from the fan . If your house wire is larger than 12-gauge and/or there is more than one house wire to
connect to the two fan lead wires, consult an electrician for the proper size wire connectors to use .
CAUTION: Be sure the outlet box is properly grounded or that a Ground (Green or Bare) wire is present .
1 . Connect household supply and fan wires according to
the diagram and these steps:
• Connect the Green wire from fan to the Bare/Green
supply wire .
• Connect the White wire from the fan to the White
supply wire .
• Connect the Black and Blue wires from the fan to the
Black supply wire .
• Secure all wiring connections together with wire
connectors (AA) .
Note: If there is a second hot/power wire coming from
the outlet box, connect it to the blue (light power) fan
wire for separate light and fan control .
Note: The Black wire is hot power for the fan . The
White wire is common for the fan and light kit . The
Blue wire is hot power for light . The Green wire is the
ground wire. If household supply wires are different
colors than referred to above, it is recommended a
professional electrician determines the proper wiring .
Hardware Used
AA
Wire Connector
2 . Wrap electrical tape (not included) around each
individual wire connector (AA) down to the wire .
3 . Turn the spliced/taped wires upward and gently push
the wires and wire connectors (AA) into the outlet box .
WARNING: Ensure no bare wire or wire strands
are visible after making connections . Place the
Green and White wire connections on the opposite
side of the outlet box from the Black and Blue wire
connections .
1
2
x 3
3
9
Black (Hot)
White (Neutral)
Bare/Green (Ground)
AA
AA
AA