Table of Contents
Advertisement
P/N 0515258_N
CLEANING THERMOMETER
Remove the two screws holding the thermometer
to its mounting bracket. Remove the sensing
element from its clip. Clean the element with
water and mild detergent solution. Ensure the
sensing element is wiped clean of any residue to
ensure proper temperature readings.
Do NOT use HOT water on Cold glass Surfaces.
This can cause the glass to shatter and could
result in personal injury. Allow glass fronts, to
warm before applying hot water.
CLEANING COILS
Condenser coils should be cleaned at least
once per month. Additional cleaning may be
needed depending on the operational environ-
ment. A dirty condenser blocks normal airflow
through the coils.
NEVER USE SHARP OBJECTS AROUND
COILS. Use a soft brush or vacuum brush to
clean debris from coils. Do not puncture coils!
Do not bend fins. Contact an authorized
service technician if a coil is punctured,
cracked, or otherwise damaged.
ICE in or on the coil indicates the refrigera-
tion and defrost cycle is not operating prop-
erly. Contact an authorized service technician
to determine the cause of icing, and to make
adjustments as necessary. To maintain product
integrity, move all product to a cooler until
the unit has returned to normal operating
temperatures.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
SHUT FANS OFF DURING
CLEANING PROCESS.
Airflow blockage increases energy consump-
tion and reduces the merchandiser's ability to
maintain operating temperature.
To clean the coils, use a vacuum cleaner with
a wand attachment and a soft (non-metallic)
brush to remove dirt and debris. Do not bend
coil fins. Always wear gloves and protective
eye wear when cleaning near sharp coil fins
and dust particles.
4-3
SHM Merchandisers
Hide quick links:
Advertisement
Table of Contents
