Construction And Operation - Mitsubishi LANCER EVOLUTION-VII 2001 Technical Information Manual

INTERIOR –

CONSTRUCTION AND OPERATION

NOTE
Refer to '99 PAJERO in Technical Information
Manual (Pub. No. PYJE9805) or '00 PAJERO PININ
Technical Information Manual (Pub. No. IKRE00E1)
DRIVER'S SIDE AIR BAG MODULE
Both the type 1 and type 2 3-spokes (MOMO) 1are
equipped. The driver's air bag module is an assem-
bly part composed of an air bag, module cover, in-
flator, and their fixing parts. It is mounted to the
steering wheel.
The air bag is made of nylon, and is inflated by gas
generated from the inflator. As the passenger
<TYPE 1>
A
A
<TYPE 2>
A
A
Supplemental Restraint System (SRS)
for more information regarding the inflator and the
clock spring of the front passenger's side air bag
module.
comes into contact with the air bag, the air bag starts
to deflate while gas is discharged from the two vents
at the back to ease the impact.
The inflator contains no sodium azide.
Caution
Never disassemble the air bag module. And nev-
er subject it to impact.
Air bag module
Module cover
Air bag module
Module cover
Section A - A
Inflator
Air bag
Section A - A
Inflator
Air bag
6-13