Makita LH1040 Technical Information page 12

R
epair
<12> Removing turn base
3. Remove hex lock nut M8x13 and flat washer 8. Now turn base can be removed from base. See Fig.10-3.
Turn base
Base
<13> Mounting turn base
1. Mount turn base and flat washer 8, and tighten hex lock nut M8x13 with socket wrench 13.
The hex lock nut M8x13 has to be so tightened, that turn base can move without wobbling.
2 Take the reverse step of disassembling after the above process.
<14> Angle adjustment of saw blade
1. Adjusting to 90° to turn base,
While applying 1R208
until both saw blade and turn base contact the jig closely. See Fig.11-1.
2. Adjusting to 45° to turn base,
While applying 1R207
until both saw blade and turn base contact the jig closely. See Fig.11-2.
Turn base
1R208
90-degree Set Square
Hex lock nut M8x13
"90-degree Set Square", turn Hex bolt M8x28 of motor housing side,
"45-degree Set Square", turn Hex bolt M8x28 of saw blade side,
Fig.11-1
Hex bolt M8x28
of motor housing side
Fig.10-3
Socket wrench 13
which comes
with the product.
Flat washer 8
Hex bolt M8x28
of saw blade side
P 12 / 20
Fig.11-2
1R209
45-degree Set Square
Turn base