Advertisement
Operations
Cleaning After Use
1. Unplug the unit.
2. Rinse Dirty Water Tank thoroughly.
2a. Remove ReadyTools Dial by rotating
it halfway between "TOOLS" & "FLOOR
CLEANING".
2b. Pop out knob by using the opening
on the back of the tank. Rinse and replace
knob and Dirty Water Tank.
3. Remove tank vent & foam filter (located
on top of the Dirty Water Tank) and rinse.
4. Clean nozzle window by lifting latch and
removing from machine. Rinse under running
water.
5. When finished, replace nozzle and
secure with latch.
NOTE: For best results, it is recommended that
the nozzle is cleaned after each use.
6. Remove lint and hair from red gasket in base
of unit. (Do not remove gasket.)
7. Replace the Dirty Water Tank to the base
of the machine and secure with latches.
Maintenance & Care
Machine Storage
For best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. Wrap power cable around Quick Release Cable
Wrap on side of the machine.
2. Wipe all surfaces with a soft cloth. Store
machine upright in a protected, dry area.
NOTE: You may have cleaning formula
remaining in the Formula Tank. You may store
your machine this way for the next cleaning
task, but never keep dirty water
in the Dirty Water Tank.
10
www.BISSELL.com.au
2a.
2b.
3.
5.
WARNING
To reduce the risk of electric shock, push power button
OFF and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
CAUTION
Do not store unit where freezing may occur. Damage to
internal components may result.
2b.
4.
6.
Hide quick links:
Advertisement
