Related Manuals for Bissell 2087 series
Summary of Contents for Bissell 2087 series
- Page 1 HAIR ERASER ® LIFT-OFF ® ENGINEERED FOR HOMES WITH PETS QUICK START/USER GUIDE 2087 Series More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.com...
-
Page 2: Quick Start / Assembly
See twisting the tab replace with the page 8 for further instructions. counter-clockwise. Febreze® filter. Febreze and related trademarks are owned by the Procter & Gamble Company, Cincinnati, Ohio and used under license by BISSELL Homecare, Inc. www.BISSELL.com... -
Page 3: New Pet Innovation
Built by Pet Owners Cyclonic Pet Hair Spooling System™ BISSELL is the only vacuum brand with a Cyclonic Pet-Hair Spooling System™ for a Hands Free Empty. A patented hair management system that spools and traps hair to keep it out of your filters and off your hands. - Page 4 Uncover hidden dirt and pet hair with the LED Lighted Crevice Tool that allows you to reach in tight places. Power through pet hair on stairs and furniture with the Pet TurboEraser® Tool. www.BISSELL.com...
-
Page 5: Safety Instructions
›› Do not plug in your vacuum cleaner UNTIL you are familiar with all instructions and operating procedures. ›› To reduce the risk of electrical shock, turn power switch off and disconnect polarized plug from electrical outlet BEFORE performing maintenance or troubleshooting checks. www.BISSELL.com... -
Page 6: Table Of Contents
Thanks for buying a BISSELL vacuum! We love to clean and we’re excited to share one of our new innovative products with you. We want to make sure your vacuum works as well in five years as it does today, so this guide has tips on using (page 7-11), maintain- ing (pages 12-15), and if there is a problem, troubleshooting (page 16). -
Page 7: Product View
This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way. www.BISSELL.com... -
Page 8: Operations
Adjusting the Floor Type Setting Turn the knob to the LEFT for high pile carpet and to the RIGHT for bare floors. Locate the Floor Type Setting on the side of the vacuum. www.BISSELL.com... -
Page 9: Above Floor Cleaning
NOTE: When wrapping the cord, be sure that it is placed securely around the cord wraps. If it falls behind the lift-off canister, it can impede reattachment. www.BISSELL.com... - Page 10 Hose Brush Roll Call BISSELL Consumer Care. Possible areas that could clog. NOTE: The thermal protector controls the main vacuum motor only, not the brush motor. If the thermal protector activates, the brush will continue to operate normally;...
- Page 11 Do not operate vacuum with damp or wet filters. Allow components to dry before reassembling the dirt container. WARNING Before using your vacuum, make sure that the dirt container is in locked position and that all filters, both pre and post-filters are in place. DO NOT operate your vacuum without these filters. www.BISSELL.com...
-
Page 12: Maintenance & Care
NOTE: Replace this filter every 3 to 6 months. Visit BISSELL.com for Style 2087 filter replacements. Parts & Supplies For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field. - Page 13 Unlock the post-motor filter by twisting washed. If dust/debris accumulates, gently the tab counter-clockwise. tap the filter on the inside of a trash bin. NOTE: Replace this filter every 3 to 6 months. Visit BISSELL.com for Style 2087 filter replacements. www.BISSELL.com...
- Page 14 Place brush roll with belt back in. To put faceplate back on, align the tabs Faceplate will not close properly if all parts in the top of the cover and place it down are not aligned correctly. to “click” into place. www.BISSELL.com...
- Page 15 Remove obstruction and brush will automatically reset when vacuum is plugged and turned back on. Parts & Supplies For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field. www.BISSELL.com...
-
Page 16: Troubleshooting
There is a crack or hole in the If there is a crack or hole, order a new Main Hose. Main Hose from the BISSELL website. Main Hose is not connected. Locate the Main Hose and reconnect by pushing the hose connection. -
Page 17: Warranty
Service If your BISSELL product should require service: Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care. -
Page 18: Product Registration
Visit www.BISSELL.com/registration! Visit the BISSELL website: www.BISSELL.com When contacting BISSELL, have model number of cleaner available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim.