Advertisement
Operations
Carpet Cleaning
1. Set ReadyTools dial to "FLOOR CLEANING".
2. Plug into proper outlet.
3. Turn the power switch to the ON (I)
position (located on the back of unit).
4. With foot, press the red recline lever (located
on the back of unit).
5. Cleaning Strokes: While pressing the spray trig-
ger, make one slow forward wet pass and another
one back. Caution: Do not overwet.
6. Release the spray trigger and make one
slow forward and backward pass over the
same area.
7. Repeat steps 5 and 6 until formula being pulled
up appears clean.
8. Empty the Dirty Water Tank when dirty water
reaches the full line, or when the Formula Tank is
empty.
Hard Floor Cleaning (select models only)
1. Turn OFF and unplug the machine.
2. Remove the Dirty Water Tank (refer to step 2
on page 6).
3. Attach the hard floor tool by hooking it into
the front of the removable nozzle and rotate
until it snaps firmly in place.
4. Fill the Formula Tank with warm tap water to
the WATER fill line. Fill with BISSELL® Wash &
Shine Hard Floor Formula to FORMULA fill line.
5. Replace the Dirty Water Tank. Be sure to
attach the two latches.
6. Plug the machine in to a proper outlet.
7. Follow steps 1-8 under "Carpet Cleaning" at
the top of this page to continue cleaning.
1.
www.BISSELL.com.au
3. & 4.
Power
Recline
Lever
7
Hide quick links:
Advertisement
