Advertisement
Assembly
The machine assembles quickly and easily. The
only tool you will need for assembly is a Phillips-
head screwdriver.
1. Slide upper body onto lower body.
2. Secure with screws.
NOTE: The screws can be found taped to
the handle.
3. Attach hose wrap to upper handle by
sliding it up the bottom of the handle until
it snaps firmly in place.
4. Slide upper handle into upper body,
until it will not go any farther and
secure with screw.
5. Place Formula Tank on back of unit.
6. Wrap power cable and flex hose.
7. Keep flex hose snugly in place by using
the hose secure latch.
8. Attach tool to end of hose.
Assembly is now complete.
WARNING
Do not plug in the machine until you have completely
assembled it per the instructions and are familiar with all
instructions and operating procedures.
1.
3.
5.
7.
www.BISSELL.com.au
2.
4.
6.
8.
5
Hide quick links:
Advertisement
