Bissell 2043 SERIES User Manual

Powerglide lift-off pet

Advertisement

POWERGLIDE
LIFT-OFF
Vacuum
___________
USER GUIDE
2043 SERIES
More of a video
person? Look for this
icon and go online
for an instructional
how-to video at
www.BISSELL.ca
®
PET
®

Advertisement

Table of Contents
loading

Summary of Contents for Bissell 2043 SERIES

  • Page 1 POWERGLIDE ® LIFT-OFF ® Vacuum ___________ USER GUIDE 2043 SERIES More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.ca...
  • Page 2: Safety Instructions

    If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a proper outlet. Do not change the plug in any way. SAVE THESE INSTRUCTIONS FOR FUTURE USE This model is for household use only. www.BISSELL.ca...
  • Page 3: Table Of Contents

    Thanks for buying a BISSELL vacuum! We love to clean and we’re excited to share one of our innovative products with you. We want to make sure your vacuum works as well as it does today for years to come, so this guide has tips on using (pages 6-7), maintaining (pages 7-9), and if there is a problem, troubleshooting (page 10).
  • Page 4: Product View

    14. Crevice Tool & Extension Wand Holder 7. Quick Release® Cord Wrap with Tools 8. Power Cord 15. Hose Wand Base 9. Filter Cover (Pre-Motor and Post-Motor Filters are located under Filter Cover) Cord Release and Storage Twist Cord Release down to quickly remove cord www.BISSELL.ca...
  • Page 5: Assembly

    Slide the Crevice Tool/ Push handle end into Extension Wand Holder Slide the Pet TurboEraser® base of vacuum on tool holder down on the down onto the middle opposite side. of the back of base. top back of the base. www.BISSELL.ca...
  • Page 6: Operations

    Reduced carpets, curtains, Reduced Suction or rugs; twist the Suction variable suction valve counterclockwise. NOTE: The vacuum will come with the Variable Suction Valve closed for full suction power. www.BISSELL.ca...
  • Page 7: Maintenance & Care

    Holding dirt container over Close bottom of a trash bin, container and place press tank back on the vacuum. empty button. Be sure you place the front of the tank first and push back to “click” into place. www.BISSELL.ca...
  • Page 8: Cleaning Filters

    NOTE: The post-motor fi lter is a pleated fi lter. This fi lter is not washable and must be replaced when it becomes dirty. Parts & Supplies For Parts and Supplies, go to www.BISSELL.ca and enter your model number in the search fi eld. www.BISSELL.ca...
  • Page 9 Replace brush roll with belt, “click” into place. making sure all parts are aligned correctly. www.BISSELL.ca...
  • Page 10: Troubleshooting

    Dirt container full Empty dirt container Filters or secondary cyclone Check secondary cyclone, pre-motor and Visible dirt escaping missing or installed incorrectly post-motor filters for correct installation from cleaner Dirt container installed incorrectly Pull out and re-insert dirt container correctly www.BISSELL.ca...
  • Page 11: Warranty

    Service If your BISSELL product should require service: Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area. If you need information about repairs or replacement parts, or if you have questions about your warranty, contact BISSELL Consumer Care.
  • Page 12: Product Registration

    Visit www.BISSELL.ca/registration! Visit the BISSELL website: www.BISSELL.ca When contacting BISSELL, have model number of cleaner available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ Parts & Supplies For Parts and Supplies, go to www.BISSELL.ca and enter your model number in the search fi...

Table of Contents