Use Of The Appliance - Electrolux GA55LI102 User Manual

1)
It comes on when it is necessary to fill the rinse aid container. Refer to 'Use of
Rinse aid
detergent and rinse aid'.
1)
It comes on when it is necessary to fill the salt container. Refer to 'Use of dishwasher
Salt
salt'.
After you fill the container, the salt indicator light can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while
a washing programme operates.
Programme selection buttons
With these buttons you can select the wash-
ing programme. Press a programme button,
the related indicator light comes on.
Refer to 'Washing programmes' for more da-
ta about the washing programmes.
Delay start button
Use this button to delay the start of the wash-
ing programme with an interval between 1
and 9 hours. Refer to 'Select and start a
washing programme'.
Display
The display shows:
• If the appliance is in setting mode
• The washing programme duration.
• The remaining time to the end of the delay
start.
Function buttons
Use the function buttons for these opera-
tions:
• To adjust electronically the level of the wa-
ter softener. Refer to 'Setting the water
softener'.
• To activate/deactivate the multitab func-
tion. Refer to 'Multitab function'.
• To activate/deactivate the rinse aid dis-
penser when the multitab function is on.
Refer to 'What to do if...'.

Use of the appliance

Refer to the instructions for each step of pro-
cedure:
1. Make a check if the adjustment of the
water softener agrees with the water
hardness in your area. If necessary, ad-
just the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
Indicator lights
• To cancel the washing programme in pro-
gress or a delay start in progress. Refer to
'Select and start a washing programme'.
Setting mode
The appliance must be in setting mode for
these operations:
• To select and start a washing programme
and/or a delay start.
• To adjust electronically the level of the wa-
ter softener.
• To activate/deactivate the multitab func-
tion.
• To activate/deactivate the rinse aid dis-
penser.
Press the on/off button. The appliance is in
setting mode when:
– All the programme indicator lights come
on.
– The display shows three bars.
Press the on/off button. The appliance is not
in setting mode when:
– Only one programme indicator light comes
on.
– The display shows one bar.
– It is necessary to cancel the programme
or the delay start to go back to the set-
ting mode. Refer to 'Select and start a
washing programme'.
4. Load cutlery and dishes into the appli-
ance.
5. Set the correct washing programme for
the type of load and soil.
6. Fill the detergent dispenser with the cor-
rect quantity of detergent.
7. Start the washing programme.
electrolux 27