Mode Setting - Sony XC-555 Technical Manual

Pin assignment of the DC IN/SYNC/VIDEO
connector
Signal Sync signal types
External Sync signal
Pin No. HD,VD
1 GND (Earth)
2 +12V
3 VBS/Y Output (Earth) VBS/Y Output (Earth) VBS/Y Output (Earth)
4 VBS/Y Output (signal) VBS/Y Output (signal) VBS/Y Output (signal)
5 HD Input (Earth)
6 HD Input (signal)
7 VD Input (signal) VS Input (signal)
8 GND (–/C)
9 –/C Output (signal) –/C Output (signal) –/C Output (signal)
10 RS-232C (TXD) *
11 RS-232C (RXD) *
12 VD Input (Earth) VS Input (Earth)
RS-232C (Earth)
Internal Sync
signal
VS Input
GND (Earth) GND (Earth)
+12V +12V
- -
- -
-
GND (–/C) GND (–/C)
GND

Mode Setting

By flipping the DIP switches located on the side of this
camera, you can adjust the following functions.
Note
Each switch is assigned to the function. The switches
that should be set for a certain function (white balance,
shutter speed, AGC (Auto Gain Control), switching of
output signals(Y/C/VBS)) are specified. The effective
switches are indicated by shade in the illustrations.
To Adjust the white balance
Select the white balance setting according to the
lighting conditions.
Lighting condition
3200K For indoor shooting under
(fixed) incandescent light (factory
setting).
5600K For outdoor shooting on sunny
(fixed) days.
ATW The white balance is adjusted
(auto tracing according to the color
white balance) temperature transition of the
subject. This mode is suitable
for shooting with variable
lighting.
MAN Select this position when you
(manual) want to adjust the red color
with the R control and the blue
color with the B control.
Overview
DIP switch setting
1 · · · · 6
1 · · · · 6
1 · · · · 6
1 · · · · 6
6