Camera Setup Readout From A List - Sony XC-555 Technical Manual

Camera Setup Readout from a
List
Read Request [RMEM]
Sends the relative address and the data, in order, from
the beginning of the Camera Setup Memory area.
Host Computer Camera
[RMEM] t
T[S00_**] ** are assumed to be 8bit(LSB: b0)
T[S01_**] ** = AGC Max Gain
T[S02_**] ** = Gain
T[S03_**] ** = AE Compensation
T[S04_**] ** = Shutter Speed(1)
T[S05_**] ** = Shutter Speed(2)
T[S06_**] ** = [E3**]
T[S07_**] ** = [E4**]
T[S08_**] ** = CCD Iris Max Speed
T[S09_**] ** = AE Speed
T[S0A_**] ** = White Balance Mode
T[S0B_**] ** = ATW Speed
T[S0C_**] ** = R-Gain
T[S0D_**] ** = B-Gain
T[S0E_**]
T[S0F_**]
T[S10_**] ** = Pedestal
T[S11_**] ** = Gamma
T[S12_**] ** = Memory Bank
T[S13_**] ** = Sharpness
T[S14_**]
T[S15_**]
T[S16_**] ** = Picture
T[S17_**] ** = Output
T[S18_**] ** = H-Phase (VS mode)
T[S19_**] ** = H-Phase (HR/VR mode)
T[S1A_**]
T[S1B_**]
b1=0: AGC OFF,
b1=1: AGC ON
b3=0: Shutter Manual, b3=1: Shutter Auto
00: 6dB, 01: 12dB, 02: 18dB
00: 0dB – 12h: 18dB
00: under – 80h: Standard – FFh: over
The first digit of the 00,01h Shutter Speed variable's 3 digits
The last two digits of the 00 – FFh Shutter Speed variable's 3 digits
The last two digits of the most recently received [E3**] command
The last two digits of the most recently received [E4**] command
00: 1/250 – 04h: 1/4000 – 08h: 1/100000
00: slow,02: norm,04: fast
00: AWB,01: ATW,03: manual,04: 3200K,05: 5600K
01: slow,02: norm,03: fast
00: min – 80h: Standard – FFh: max
00: min – 80h: Standard – FFh: max
Not Defined
Not Defined
71h: min – 8Fh: Standard – FFh: max
00: OFF, 80h: ON
00: Factory, 01: Bank A, 02: Bank B
7Ah: min – 89h: Standard – FFh: max
Not Defined
Not Defined
00: Nega, 01: Norm
00: Y/C, 01: VBS
00: Phase Delayed – 80h: Standard – FFh: Phase Advanced
00: Phase Delayed – 80h: Standard – FFh: Phase Advanced
Not Defined
Not Defined
RS-232C Command List
17