Information; Chapter 7. Message - UTStarcom CDM-7025 User Manual

VOICE SIGNAL COMMANDS
CALL ALERT
The "Call Alert" setting control how you are notified when receiving a
call. "Name + Ring" will first announce the name and then play the set
ring tone. "Ring only" will play the set ring tone only. "Name Repeat"
continuously, states the name or number until the call is answered or
incoming call alert ends.
1.
Press OK KEY [MENU], then select "Settings & Tools" menu,
press 8 KEY "VR Settings".
3.
Select 4 KEY "Call Alert".
4.
Select "Ring Only", "Name+Ring" or "Name Repeat" with the
Navigation Key.
5.
Press OK KEY to save it.

INFORMATION

1.
In standby mode, press NAVIGATION
pause, "Please Say a Command"
pronounced through the speaker.
2.
Press LEFT S.KEY [INFO].
3.
Your phone displays the information requested above and plays it
through your speaker.
91
UP.KEY, After a brief
appears in the display and is
CHAPTER 7
MESSAGE
This chapter addresses Voice Mail, TXT Messaging
functions including:
NEW MSG
INBOX
SENT
DRAFTS
VOICE MAIL
ERASE ALL
SETTINGS
CHAPTER 7
MESSAGE
92