Vr Settings - UTStarcom CDM-7025 User Manual

VOICE SIGNAL COMMANDS
Voice Signal commands allow you to dial numbers, lookup contact
information, and open applications using your voice.
1.
In standby mode, press NAVIGATION
pause, "Please Say a Command"
pronounced through the speaker.
2.
After the phone beeps, say the name of the command that you
want to perform.
The Voice Signal commands listed in the following table are available.
• Contacts/Look up: Lets you retrieve contact information for any entry
in your contacts list.
• Digit Dial: Lets you dial a phone number by saying a name saved in
your contact list or by saying the digits in the phone number.
• Redial/Last Number: Lets you dial a phone number by last dial phone
number.
• Driving: Lets activating driving mode.
• Missed Calls: Lets you view missed calls list.
• Voice Mail: Lets access Voice Mail.
• Battery: Lets you view your phone's current battery level.
87
UP.KEY, After a brief
appears in the display and is
VOICE SIGNAL COMMANDS

VR SETTINGS

CHOICE LIST
The "Choice List" setting option will allow you to choose if the
Command System prompts you with a list of potential matches.
"On" will always present you with a best match list of names or
numbers. When multiple matches are found, the system will prompt
you to choose from a list of matches. If the Choice List is set to "Off",
the voice command system will select the best match.
1.
Press OK KEY [MENU], then select "Settings & Tools" menu,
press 8 KEY "VR Settings".
2.
Select 1 KEY "Choice List".
3.
Select "1 match" or "4 match" with the Navigation Key.
4.
Press OK KEY to save it.
88