Eades Appliance Technology SousVide Supreme Operating Instructions Manual page 8

Set the delayed-start timer
Touch and hold Timer for three seconds. You will hear one tone. Delay Start
will hear two tones.
Touch Plus or Minus and hold to reach the desired delayed-start setting. You will hear a tone, and the display will
show time scrolling in 30-minute increments. Maximum delayed start time is eight hours.
Once you have scrolled to the desired timer setting, touch Start. You will hear an ascending three-tone alert. Delay Start
will animate in the display. You will hear three tones, and the display will revert to the set-temperature function.
(See page 6.)
When the delayed-start setting has elapsed, you will hear one tone, Water Temperature
Heating will illuminate, and the display will show the water temperature.
When the water reaches the set temperature, you will hear a five-tone ascending alert, and Water Temperature
will stop blinking and remain illuminated in the display.
Change the delayed-start timer setting during operation
Touch and hold Timer for three seconds. You will hear one tone. The display will show the time remaining in the previously
programmed delayed start, you will hear two tones, and you will have 10 seconds to reset the delayed-start timer.
Touch Plus or Minus and hold to reach the new delayed-start setting. You will hear a tone, and the display will show
time scrolling in 30-minute increments. Maximum delayed-start time is eight hours.
Once you have scrolled to the new delayed-start setting, touch Start. Start must be selected within 10 seconds of
selecting Timer, or the new delayed-start time will not be set.
will illuminate and blink, and you
8
will illuminate and blink,