Set The Temperature - Eades Appliance Technology SousVide Supreme Operating Instructions Manual

Set the temperature

To switch between Celsius and Fahrenheit Touch Temperature (you will hear a tone) and hold for three seconds.
You will hear a second tone when the temperature scale switches from Celsius to Fahrenheit.
Touch Temperature. You will hear one tone. The display Thermometer
Touch Plus or Minus and hold to scroll to desired temperature setting. You will hear a tone, and the display will
show the temperature increase or decrease in 1°F / 0.5°C increments.
Once you have scrolled to the desired temperature, touch Start to set it. You will hear an ascending three-tone alert.
The display Thermometer will disappear, Water Temperature
and the display will show the water temperature.
When the water reaches the set temperature, you will hear a five-tone ascending alert, and Water Temperature
will hold steady in the display.
Check the temperature setting during operation
Touch Temperature. You will hear one tone, and the display Thermometer
show the set temperature for 10 seconds, and then revert to the actual water temperature.
Change the temperature setting during operation
Touch Temperature. You will hear one tone, and the display Thermometer
show the set temperature for 10 seconds, and then revert to the actual water temperature.
Touch Plus or Minus and scroll to the desired temperature setting. The display will show the temperature
increase or decrease in 1°F / 0.5°C increments.
Once you have scrolled to the desired temperature, touch Start to set it. Start must be selected within 10 seconds of
selecting Temperature, or the new temperature will not be set.
will illuminate and blink.
will illuminate and blink, Heating
will illuminate and blink. The display will
will illuminate and blink. The display will
6
will appear,