Morso O Series Instructions For Installation And Use Manual page 4

Clearance Distance to combustible materials:
Model Behind the To the sides
Ø4
uninsulated flue
Ø4
Dim. without indication of margin acc. to DS/ISO 2768-1 m
Material:
Weight:
Model no.
Drawingtype: Dimension Skecth
Location of file:
U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM
In situations where the stove is to be fitted into a brick or non-combustible recess, we re-
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
commend that the stove is installed with at least 10 cm clearance to the wall, this will allow room
air to circulate around the stove; also the maintenance of the outside stove is easier. When
applied to masonry, a layer of wallpaper is normally classified as a non-combustible surface.
Clearance to combustible surfaces in front of stove:
Model Distance to combustible materials in front of the stove
Ø4
The clearances stated above are minimum distances, but consideration ought to be given to
whether furniture or other items can be affected by heat.
A wood-burning stove gets hot when it is fired. The necessary caution must therefore be
observed, particularly where children or the infirm are present.
Hearth requirements:
The stove MUST be fitted in accordance with Local and National Building Regulations.
The O-serie stoves has been independently certified.
During the safety test the floor temperature did not exceed 100°C. The stoves may therefor
be placed onto a hearth made of non-combustible board/sheet material or tiles at least 12
mm. thick.
Consideration should also be given as to the stove weight to ensure that the underlying floor
is able to bear the weight.
The handle will get hot when the stove is in use, for this reason a safety mitten is provided.
4
stove (A) of the stove (B)
650 mm 550 mm
B
Rev. Revisions Sign.:
Title: Construction: RSV 08.09.09
Afstand til hjørnevæg
Released:
A4
Format:
Distance to Corner wall
1:10
Scale:
Ø-4
Itemno.:
Drawing no.:
Steel-121 a
700 mm.
Above the stove
600 mm
B
Date:
Dim. without indication of margin acc. to DS/ISO 2768-1 m
Material:
Weight:
Model no.
Drawingtype: Dimension Skecth
Location of file:
U:\udv\Tegninger\Diverse\Afstand til brandbare vægge\Afstand til hjørnevæg.SLDASM
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
To soft furnishings
700 mm
Rev. Revisions Sign.: Date:
Title: Construction: RSV 08.09.09
Afstand til hjørnevæg
Released:
A4
Format:
Distance to Corner wall
1:10
Scale:
Ø-4
Itemno.:
Drawing no.:
Steel-121 a