Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kostal PIKO Inverter 3.0
Summary of Contents for Kostal PIKO Inverter 3.0
- Page 1 01 / 2013 Short Manual PIKO Inverter 3.0...
- Page 2 Important information The inverter may only be installed, operated, maintained and repaired by trained Types of danger and qualified staff. rISK Of deaTH dUe TO eLeCTrICaL SHOCK aNd Warning signs and safety instructions dISCHarge always de-energise the inverter before any work on the system. DANGER DUE TO DANGER DUE TO BURNS rISK Of deaTH dUe TO eLeCTrICaL SHOCK...
-
Page 3: Proper Use
EN 62109-2: 2011 (Safety of power converters) Part 2 manufacturer. KOSTAL Solar Electric GmbH – 2012 -12 -18 Only a qualified electrician may open the device. The inverter must be installed by an electrician who is responsible for observing the applicable norms and regulations. -
Page 4: Type Plate
Hanferstraße 6 – D-79108 Freiburg Hanferstraße 6 – D-79108 Freiburg Number of feedin phases +49 (0) 477 44-100 +49 (0) 477 44-100 Maximum AC power www.kostal-solar-electric.com www.kostal-solar-electric.com Protection type and ambient XXXXXXXX XXXXXXXX temperature DC input: UMPP = XXX…XXX V,... - Page 5 Selecting the installation side NOTe Observe the following instructions, or else warranty claims will be restricted. Select stable installation location. Protect from rain and water. No plasterboard or wooden walls. Prevent access by children. Protect from direct sunlight. Required cooling space is 200 mm vertical and Select non-flammable installation location.
-
Page 6: Installation
Installation Ground connection (for France only) Cooling space mounting spaces max.10° 3 Nm... - Page 7 Connecting AC and DC side LeBeNSgefaHr dUrCH STrOmSCHLag! ОпаснОст за живОта пОради тОкОв удар. Wechselrichter spannungsfrei schalten. изключвайте инвертора от напрежението. rISK Of deaTH dUe TO eLeCTrICaL SHOCK! LIVSfara På grUNd aV eLeKTrISK STöT! de-energise the inverter. Koppla växelriktaren spänningsfri. daNger de mOrT Par éLeCTrOCUTION ! zagrOżeNIe żyCIa Przez POrażeNIe Prądem! mettre l’onduleur hors tension.
- Page 8 Connecting AC and DC side Connecting AC side (for Italy only) N PE Connecting aC side Connecting dC side...
- Page 9 Data transfer communication board GSM modem...
-
Page 10: Commissioning The Inverter
Commissioning the inverter Selecting the country of use 5 Nm Select Country setting Austria enter NOTe Country setting de may only be used with inverters installed in PV plants connected to the grid before 31.12.2011. (No displacement factor cosφ preset.) - Page 11 Selecting the country of use Menu overview, DC and AC dC menu Settings menu aC menu Select country Country setting Enter Austria dC menu DC input 1 Select YES Country setting aC menu Do you really want to apply Enter this country? Total yield Yield...
-
Page 12: Settings Menu
Settings menu Basic settings Language Select language Inverter name Entering the name Date / time Set date Set time of day Communication Network settings 1 Auto IP Network settings 2 IP address Subnet mask Router settings External router Router IP RS485 settings Bus termination Bus bias voltage... -
Page 13: Technical Data
Technical data PIKO Unit PIKO Unit Input side (dC) Output side Inverter type PIKO 3.0 Rated output, cos φ = 1 (Pac,r) Max. PV power Max. output apparent power cos φ, adj MPP range DC 160 - 730 Rated output current Max. - Page 14 PIKO Unit PIKO Unit System data System data Topology: without galvanic separation - Electronic disconnection device integrated transformerless Height Internal protection according to IEC 60529 IP 55 Width Protection class according to IEC 62103 Depth Overvoltage category according to IEC 60664-1 Weight Input side (PV generator) Max.
-
Page 15: Service Hotline
Service Hotline Germany +49 761 47 74 42 22 and other countries France +33 1 6138 4117 Belgium, Luxembourg Greece +30 2310 477 555 Italy +39 011 97 82 420 Spain +34 961 824 927 Portugal Language: German, English Language: Spanish, English 01 / 2013 edition, subject to technical changes and printing errors.