Table of Contents
Advertisement
2. SMS
2.7. Server Configuration
2.7.1. CineCanvas™ and CineLink™ Configuration
Connect a network cable from the eth 0 LAN port of the GDC server to the LAN port of the projector that will accept
CineCanvas™
communication. Make sure the server and projector are set on the same subnet network. For
example, if the projector is set to 10.10.10.10 and the server is set to 192.168.0.200, either the server has to change
its IP to 10.10.10.xxx or the projector has to change its IP to 192.168.0.xxx for them to be on the same network.
*
assuming default subnet of 255.255.255.0
1
Figure 34
SMS Interface [Configuration].
- 63 -
SX-2000A Series with Integrated Media Block/SX-2001A Series
April 22, 2014
User Manual
Advertisement
Table of Contents
