Table of Contents
Advertisement
3. CONTROL PANEL
3.2. Control Panel Menu
1
Figure 52
Control Panel menu.
1
Switch ON the server and allow it to boot up to prompt directly to the
SMS
interface.
When the SMS interface is shown, push the ON/OFF button once or press the
Control
Panel
button and a new window for the
Control Panel
menu opens as shown in Figure
52. The
Control Panel
includes the
Extract Logs & configuration
buttons, the
Automation
button, Admin panel
button,
Manage Content
button,
System monitor
button,
SMS
button,
Restart
button,
Shutdown
button and a
Refresh status
button. System information including
the serial number, OS version, SMS version, network and storage information can also be
seen on the Control Panel UI.
NOTE: The
Refresh status
button is used to manually refresh the status of the hard disks in
the server. This button should not be pressed during playback to prevent disruption of
playback.
WARNING:
Do not press the ON/OFF button for more than 2 seconds when in the
Control Panel
menu to prevent accidental shutdown of the system. This may cause a
hard reset and any running applications will be terminated without visual warning.
The SMS software continues to run in the background when using the Control Panel.
This allows access to other server functions when playback is in progress. It is
recommended that these functions be used very sparingly to avoid unnecessary system
load that can potentially affect playback performance.
- 89 -
SX-2000A Series with Integrated Media Block/SX-2001A Series
April 22, 2014
User Manual
Advertisement
Table of Contents
