Table of Contents
Advertisement
2 Installing ACT365 VCU
Installation Instructions
ACT365 VCUs are for indoor installation only and must be installed as permanently connected equipment.
Each VCU supports up to four IP cameras.
Mounting
Mount the ACT365 VCU to a solid surface using the supplied screws. The unit should be installed in a
ventilated area that allows for easy access after installation.
2.1 ACT365 VCU Connections
The ACT365 VCU requires an external 12V DC power supply connected to the +12V and 0V terminals on
the ACT365 VCU.
2.1.1 Ferrite bead installation
After you install the ACT365 VCU, Vanderbilt recommend that you place the provided ferrite bead (a noise-
suppression device) around the Ethernet cable near the RJ45 connector to attain a desired level of
electromagnetic compatibility (EMC). The ferrite bead is provided along with a screw kit in a clear ziplock
bag inside the unit enclosure.
© Vanderbilt 2018
7
18-00103-b
06.07.2018
Advertisement
Table of Contents
