IBM 9040-MR9 Manual page 28

b) Click System Brand.
Note: If you do not know the correct system brand, contact your next level of support.
c) If the system brand matches what you recorded previously, click Accept backed up setting and
save the settings. Otherwise, enter the correct system brand and click Continue.
d) Click Save setting to update the system brand to the VPD.
e) Click System Keywords.
Note: If you do not know the system unique ID, contact your next level of support. You cannot
boot the system until valid values are entered for all fields. You can change these entries only
once.
f) If the system keywords match what you recorded previously, click Accept backed up setting and
save the settings. Otherwise, enter the values for the machine type, model number, system serial
number, system unique ID, and RB Keyword.
g) Click Save settings to update the system keywords and to save them to the VPD.
h) In the ASMI navigation panel, expand Power/Restart Control > Power On/Off System. Click
Server firmware start policy and select Standby. Then, click Save settings and continue power
on.
i) In the ASMI navigation panel, expand On demand Utilities > CoD Activation. Enter the CoD code
and click Continue to write the CoD code to VPD. Repeat this step for all of the COD and VET
codes.
j) In the ASMI navigation panel, expand Power/Restart Control > Power On/Off System. Click
Server firmware start policy and select Running (Auto-Start Always). Then, click Save settings
and continue power on.
11. Verify the installed part.
• If you replaced the part because of a service action, verify the installed part. For instructions, see
https://www.ibm.com/support/knowledgecenter/POWER9/p9ect/
pxect_verifyrepair.htm (www.ibm.com/support/knowledgecenter/POWER9/p9ect/
pxect_verifyrepair.htm).
• If you installed the part for any other reason, verify the installed part. For instructions, see https://
www.ibm.com/support/knowledgecenter/POWER9/p9haj/pxhaj_hsmverify.htm (www.ibm.com/
support/knowledgecenter/POWER9/p9haj/pxhaj_hsmverify.htm).
14 Power Systems: Vital product data card for the 9040-MR9