Advertisement
Quick Links
1
Familiarize yourself
with the control panel
and how each item
functions before
operating this machine.
4
When using the
detergent dispensing
system Do not mix
chemicals in the
solution tank
water).
7
Pre-spray spots and
heavy traffic areas
before extracting.
ES4000 How To
Prepare for use
2
Turn on the key switch
and check the Battery
Indicator and hour
meter.
5
Use the Sweep Mode
to clean area prior to
extracting
attach the dry hose when
using sweep mode)
(use plain
8
Gather accessories
needed)
(You must
.
(if
.
3
Fill the solution tank 1/3
with water then add
appropriate chemical.
(Temperature should not
exceed 130°F).
6
Clean area using
Sweep Mode to
vacuum debris from the
entire area to be
cleaned.
9
Drive machine to work
location.
Advertisement
Related Manuals for Nilfisk-Advance ES4000
Summary of Contents for Nilfisk-Advance ES4000
- Page 1 ES4000 How To Prepare for use Turn on the key switch Fill the solution tank 1/3 and check the Battery Familiarize yourself with water then add Indicator and hour with the control panel appropriate chemical. meter. and how each item (Temperature should not exceed 130°F).
- Page 2 ES4000 How To Extract Mode Machine Operation Switch the recovery hose to Wet Pick up connection Clean area using the Extract Mode: press Review control panel for Extract On switch (horn will cleaning mode options. beep) Drive the machine...
-
Page 3: Weekly Maintenance
ES4000 How To Prepare for Storage & Maintenance Remove and clean vacuum shoes, debris hopper, vacuum motor Charge batteries and filter, strainer basket and inspect and clean the vacuum shut-off float. solution and recovery Remove brushes. Inspect tanks. and clean hoses and...
Need help?
Do you have a question about the ES4000 and is the answer not in the manual?
Questions and answers