Table of Contents

Advertisement

Available languages

Available languages

Operation

General Operation
WARNING: This electric
firebox must be properly
installed before it is used.
This firebox operates with
Comfort$aver
which automatically adjusts the
fan speed and heater wattage to
safely and precisely match the
requirements of the room based
on the thermostat setting.
The heater operates such that
once the room reaches the set
point, the fan and heater will
continuously run at a low level,
to maintain the desired room
temperature. If the temperature
in the room rises significantly, i.e.
sun coming through a window or
a central furnace turns on, the
heater will turn off and periodically
turn back on to circulate the air
around the unit, until the room
temperature drops and requires
the heater to be constantly on
again.
! NOTE: The unit is designed
so that the fan will run
continuously while the heater
is on.
16
technology,
TM
! NOTE: The element retains
heat after shutdown. When
the heat is turned Off, there
is a 2-minute cool down
period before the fan shuts off
completely.
Remote Operation
The fireplace is supplied with an
IR multi-function remote control.
! NOTE: To operate correctly, the
remote control must be pointed
towards the front of the unit.
Controls
The unit can be controlled by
either the manual controls which
are located on the upper right of
the fireplace or the remote
(Figures 11 and 12).
A.
Standby
Turns the unit On and Off.
Activated by pressing the
Standby button on the remote
or the unit.
• The unit will turn On with the
same functions that it was set
to when it was turned Off and
the intake temperature will be
indicated on the Display.
www.dimplex.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rel7Rel6Rel10

Table of Contents