Vertex Standard FT-857 Operating Manual page 17

FCC ID: K66FT-857
Operating Manual
Multi Function Row "j" (MFj) [SPOT, BK, KYR]
[A] Key: SPOT
Press the [A](SPOT) key to activate the CW spotting heterodyne oscillator.
[B] Key: BK
Press the [B](BK) key to disable the CW "Semi" break-in operation.
Press and hold in the [B](BK) key for one second to recall Menu Mode No-029 [CW SIDE TONE] (for setting the CW
side tone volume level).
[C] Key: KYR
Press the [C](KYR) key to activate the built-in Electronic Keyer.
Press and hold in the [C](KYR) key for one second to recall Menu Mode No-030 [CW SPEED] (for setting the Keyer
speed).
Multi Function Row "k" (MFk) [TUNE, DOWN, UP]
[A] Key: TUNE
Press the [A](TUNE) key to activate the optional FC-30 Automatic Antenna Tuner or ATAS-100/-120 Active-Tuning
Antenna System.
Press and hold in the [A](TUNE) key for one second to initiate tuner or antenna retuning.
[B] Key: DOWN
Press and hold in the [B](DOWN) key to lower the ATAS-100/-120 antenna manually.
[C] Key: UP
Press and hold in the [C](UP) key to raise the ATAS-100/-120 antenna manually.
Multi Function Row "l" (MFl) [NB, AGC, --------]
[A] Key: NB
Press the [A](NB) key to activate the receiver's IF Noise Blanker.
Press and hold in the [A](NB) key for one second to recall Menu Mode No-063 [NB LEVEL] (for setting of the NB
level).
[B] Key: AGC
Press the [B](AGC) key to disable the receiver's AGC system. Normally, the AGC should be left On.
[C] Key
Press the [C] key to select the recovery time (Slow, Fast, or Auto) for the receiver's AGC system.
Multi Function Row "m" (MFm) [IPO, ATT, NAR]
[A] Key: IPO
Vertex Standard Co., Ltd.
17