Vertex Standard FT-857 Operating Manual page 68

MEM/VFO CH knob one click clockwise to move to the next character.
5. Repeat step 4 as many times as necessary to complete the Beacon Text.
If the Beacon Text is less than 40 characters or more than 40 characters, see page 50 for details.
MENU MODE No 012 [BEACON TIME]
Function: Selects the interval time (between message and message).
Available Values: OFF/1 sec ~ 255 sec
Default: OFF
MENU MODE No 013 [BEEP TONE]
Function: Selects the beep frequency.
Available Values: 440/880/1760 Hz
Default: 880 Hz
MENU MODE No-014 [BEEP VOL]
Function: Selects the beep volume level.
Available Values: 0 ~ 100
Default: 50
Press the [B] key to monitor the level during adjustment.
MENU MODE No 015 [CAR LSB R]
Function: Sets the Rx Carrier Point for LSB.
Available Values: –300 ~ +300 Hz
Default: 0 Hz
MENU MODE No 016 [CAR LSB T]
Function: Sets the Tx Carrier Point for LSB
Available Values: –300 ~ +300 Hz
Default: 0 Hz
MENU MODE No 017 [CAR USB R]
Function: Sets the Rx Carrier Point for USB
Available Values: –300 ~ +300 Hz
68
FCC ID: K66FT-857
Operating Manual
Vertex Standard Co., Ltd.