Graco 223627 Instructions-Parts List Manual page 2

Table of Contents
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Graco Standard Warranty
Graco Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTE: The following warning applies only to Models 214018, 208250, 214019, & 210097, which contain aluminum
housings.
Hazard of Using Fluids Containing Halogenated Hydrocarbons
Never use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids contain-
ing such solvents in the models listed in the not above. Such use could result in a serious chemical reaction,
with the possibility of explosion, which could cause death, serious injury and/or substantial property damage.
Consult you fluid suppliers to ensure that the fluids being used are compatible with aluminum parts.
Connect the Fluid Hose
Regulators or Circulating Adapters:
Connect the fluid hoses to the 1/4 npsm(m) inlet and
return fittings.
Straight Adapter:
Connect a hose to the 3/8 npsm(m) inlet fitting.
Connect the Regulator or Adapter to the Gun
Model 223622:
Screw the regulator union adapter onto the gun fluid
inlet.
2 307016
. . . . . . . . . . . . . . . . . . . . . .
WARNING
Installation
Symbols
Warning Symbol
2
2
3
3
This symbol alerts you to the possibility of serious
4
injury or death if you do not follow the instructions.
9
10 Caution Symbol
10
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
corresponding instructions.
Models with Twist-lock Couplers:
Screw the coupler stem onto the gun inlet. Connect the
twist-lock couplers by lining up the coupler slots with
the pins on the stem, pushing the coupler onto the
stem, then twisting the coupler clockwise to lock it.
Models with Slip-ring Couplers:
Pull the slip ring back as you push the coupler onto the
stem.
WARNING
CAUTION