Siemens SIMATIC TOP connect Manual page 65

Table 6-4
Terminal modules TP1 and TP3, 16-pin
1-wire connection with LED 6ES7924-0AA20-0Bx0
3-wire initiators with LED 6ES7924-0CA20-0Bx0
Type of supply voltage
Operating voltage
Max. permissible continuous current per signal
Max. permissible total current
(power supply)
Connection to SIMATIC fitted for
Operating temperature
Mounting position
Clearances and creepage distances
Dimensions (W x H x D) in mm
1-wire connection 6ES7924-0AA20-0Bx0
For 3-wire initiators 6ES7924-0CA20-0Bx0
Table 6-5
Terminal modules TPA, 16-pin, for analog modules of S7-300 or ET200M
6ES7924-0CC21-0Ax0
Type of supply voltage
Operating voltage
Max. permissible continuous current per signal line 1 A
Connection to SIMATIC fitted for
Operating temperature
Mounting position
Clearances and creepage distances
Dimensions (W x H x D) in mm
6ES7924-0CC21-0Ax0
System cabling for S7-300
Manual, 09/2018, 70327045899
Technical specifications of terminal modules TP1 and TP3 with LED
Technical specifications for terminal module TPA
6.7 Technical specifications for terminal modules
DC
max. 24 V
1 A
4 A / byte
16-pin IDC connector with fitted strain relief
0 to + 60° C
Any
IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
overvoltage category II,
degree of pollution 2
Approx. 40 x 58 x 50
Approx. 57 x 76 x 60
DC
max. 50 V
16-pin IDC connector with fitted strain relief
0 to + 60° C
Any
IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
overvoltage category II,
pollution degree 2
Approx. 57 x 76 x 60
Technical specifications
65