Technical Specifications For Terminal Modules - Siemens SIMATIC TOP connect Manual

Technical specifications

6.7 Technical specifications for terminal modules

For 6ES7923 - * connecting cables
Unshielded
Shielded
6.7 Technical specifications for terminal modules
Note
The "x" in the article numbers is a placeholder for the terminal module version with push-in or
screw-type terminals.
In place of the "x", there is either an "A" for the version with screw-type terminals or a "C" for
the version with a push-in system.
Terminal modules for 16-pin connecting cable
Table 6-3
Terminal modules TP1 and TP3, 16-pin
1-wire connection without LED 6ES7924-0AA20-0Ax0
3-wire initiators without LED 6ES7924-0CA20-0Ax0
Type of supply voltage
Operating voltage
Max. permissible continuous current per signal
Max. permissible total current
(power supply)
Connection to SIMATIC fitted for
Operating temperature
Mounting position
Clearances and creepage distances
Dimensions (W x H x D) in mm
1-wire connection
6ES7924-0AA20-0Ax0
For 3-wire initiators
6ES7924-0CA20-0Ax0
64
Technical specifications for terminal modules TP1 and TP3 without LED
16-pin: Approx. 6.5 mm
50-pin: Approx. 10.5 mm
16-pin: Approx. 7 mm
DC
max. 50 V
1 A
4 A / byte
16-pin IDC connector with fitted strain relief
0 to + 60° C
Any
IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
Overvoltage category II,
pollution degree 2
Approx. 40 x 58 x 50
Approx. 57 x 76 x 60
Manual, 09/2018, 70327045899
System cabling for S7-300