Preface; System Cabling For S7 - Siemens SIMATIC TOP connect Manual

Preface

Purpose of this documentation
This documentation provides important information on wiring the I/O modules (input and output
modules) of the S7-300 SIMATIC controller and the ET 200M modular I/O system with
SIMATIC TOP connect system cabling.
Basic knowledge required
Basic knowledge of automation technology is required to understand the documentation.
Scope of this documentation
This documentation applies to all SIMATIC products in the S7-300 product family with ET 200M.
Conventions
Please pay particular attention to notes highlighted as follows:
Note
A note contains important information about the product described, about handling the product
or about a specific section of the documentation that requires particular attention.
Recycling and disposal
The products can be recycled as their components are low in pollutants. For the
environmentally friendly recycling and disposal of your old device, contact a certificated
disposal service for electronic scrap.
Additional support
● You can find information on the technical support service in the appendix to this
documentation.
● The technical documentation for the various SIMATIC products and systems is available
on the Internet (http://www.siemens.com/simatic-tech-doku-portal).
● You can find the online catalog and online ordering system on the Internet
mall.automation.siemens.com).

System cabling for S7-300

Manual, 09/2018, 70327045899
(http://
3