Dimension drawings
A.2 Terminal modules
A.2
Terminal modules
Views
All views in the dimension drawings below are numbered.
The following applies:
Number
①
②
③
Note
All dimensions in millimeters (mm).
Note
The dimensions for terminal modules with screw-type terminals are the same as for those with
the push-in system.
You can see the screw terminals in the figure. The code in the last group of the order
number ...-0Ax0 refers to the terminal type.
● x replaced by A = Screw-type terminal
● x replaced by C = Push-in terminal
A.2.1
Terminal modules for 16-pin connecting cable
Terminal modules for 16-pin connecting cable
This section presents the dimension drawings of the terminal modules for 16-pin connecting
cables
80
View
Front view
Front view with front flap closed
Left view with front flap closed
Manual, 09/2018, 70327045899
System cabling for S7-300