IKUSI HTL-STC User Manual page 32

NAME: Shows the proposed network name.
NID: Shows the network identifier.
ONID: It allows to select the value that will be included as original network identifier in all multiplex
that forms the network.
AUTOMATIC SERVICES LIST: Activate the box to include a service_list_descriptor in the NIT,
generated by the master module and based on the services available at the headend station output.
NIT LCN MODE: Click on the drop-down list to select the LCN transmission standard in the
NIT: EUROPEAN STANDARD (by default), NORDIG STANDARD V1 2, NORDIG STANDARD V2 3,
GENERIC MODE (e.g., for Australia). Disable to not enter LCN.
NIT PATTERN Click on the drop-down list to select one of the three available NIT models:
NO NIT PATTERN: The master module generates a NIT from zero, based on the selected output
frequencies, the output services and the selected LCNs.
MERGED NITS: Calculates a new NIT based on the NITs in the input signals; if there is relevant
information in the input NITs, it is sent to the output.
INPUT NITS: Calculates a new NIT based on the input NITs selected as pattern.
DVB-SI TABLES: Click on the icon
Save: Click on the button to keep the changes.
Modules in networks
A drop-down icon can be used to edit the following parameters:
ONID: It allows to select the value that will be included as original network identifier in a specific multiplex.
TSID: It allows to select the value that will be included as transport stream identifier of a specific multiplex.
Save: Click on the button to keep the changes.
to download the headend module tables.
33