Page 1
Ref. 3854 Ref. 3854 Ref. 3854 DIGITAL MODULATOR DIGITAL MODULATOR DIGITAL MODULATOR SYNC STATUS SYNC STATUS SYNC STATUS +12V +12V +12V Link Link Link DVB-T OUT DVB-T OUT DVB-T OUT PROGRAMMING GUIDE «MHD-201» MODULATOR CVBS; HDMI; HD-SDI DVB-T or IP...
Programming MHD-201 Modules START SCREENS 1 - Module Basic Information As described in Basic Handling guide supplied with the SPI-300, on connec- ting it to the module the identification data, settings and status of the module are loaded onto the remote. The module detection screen appears for a short...
• Update: This option does not apply to this model. The firmware update is performed only through the web interface (see manual www.ikusi.tv). • Recall: Returns the configuration of the module previously created with the Save command. This menu is useful to quickly load repetitive data in multi-...
Programming MHD-201 Modules • Save: Saves the module configuration in the memory of the SPI-300 remote. • Factory Reset: Restores all parameter values that were set up in the module when it left the factory • About ... : Simply reports the firmware version of the SPI-300.
Page 6
Programming MHD-201 Modules Main Screen INFO 1 General 2 Settings 3 Info 4 Language The Info menu provides access to detailed information about the connected module, regardless of whether it has been programmed or not. 1 Status 2 Alarm 3 Details •...
Programming MHD-201 Modules Main Screen LANGUAGE 1 General 2 Settings 3 Info 4 Language Select here the language you want to operate in from now on. Position the cursor in the "Spanish" line and press the button . PROGRAMMING SCREEN In the next part of this manual, the commands to configure the module will be explained.
Page 8
Programming MHD-201 Modules • IP Address: Static IP address within the valid range of the local network to which the module is connected. • Network Mask: Local network mask. • Default gateway: IP address of the default gateway on the local network to which the module is connected.
Low latency: Reduces encoding time for applications where response time is important (e.g. cameras). Selecting the low-latency mode, has on the other hand decreased coding efficiency and image quality with a lot of movement. Output: The MHD-201 modulator has two output types CODFM and IP. Using ...
Page 10
Programming MHD-201 Modules Channel: Enables the output channel to be selected and modified. Frequency: Reports on the output frequency of the current radio frequency carrier and enables its value to be modified. The frequency value must lie within the valid range for VHF and UHF bands.
Page 11
Programming MHD-201 Modules • Service: Depending on whether the Input configuration is in HD or SD mode we can have one or two services respectively. 1 Service 1 2 Video 1: 3 Audio 1: 4 LCN 1: 5 SDI 1:...
Need help?
Do you have a question about the MHD-201 and is the answer not in the manual?
Questions and answers