Spare Parts And Accessories - Siemens Sinumerik 828D Manual

*) If the outputs for the illuminated pushbuttons (X53/X54) are loaded with the max. permissible current
of 0.3 A, this results in additional power consumption of 36 W. The total power consumption is then 50
W.
See also
Other values/standards: Chapter "Application planning (Page 35)"
7.4.6

Spare parts and accessories

Table 7-33
Name
Emergency-Stop
button
Contact block
Sets of keys
Set of tensioners
Override
Spindle rotary
switch
Override
Feed rotary switch
Key cap
Key cap
Cable set
Accessories pack (for delivery ex works):
Component
Keyset
Yellow backing plate
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4
Accessories and spare parts for MCP 310C PN
Description
22 mm actuating element, 40 mm mushroom
pushbutton, snap action with tamper protec‐
tion, latching, red, with holder, non-illumina‐
ted
with 2 contact pairs (1 NO + 1 NC), 2-pin,
screw terminal (3rd contact pair can be addi‐
tionally connected)
Set of keys (10 sets) for machine control pan‐
el
Tensioner set (9 items) for supplementary
components with 2.5 mm profile, length 20
mm
Spindle/rapid traverse override, electronic ro‐
tary switch 1x16G, T=24, cap, knob, pointer,
spindle and rapid-traverse dials
Override feedrate / rapid traverse electronic
rotary switch 1x23G, T=32, cap, knob, point‐
er, feedrate and rapid-traverse dials
Square, can be labeled by laser, 1 set of 90,
ergo-gray and 20 each of red / green / yellow /
medium gray
Square, for inscription plates, 1 set of 90,
clear
For additional MCP control devices, length
500 mm
Description
Key caps for turning (labeled)
Ergo gray key caps (can be labeled)
Clear key caps (can be labeled)
for emergency stop
Anschließbare Komponenten
7.4 MCP 310C PN
Amoun Article number
t
1 3SB3000-1HA20
1 3SB3400-0A
1 set 6FC5148–0AA03–0AA0
1 set 6FC5248–0AF14–0AA0
1 6FC5247–0AF12–1AA0
1 6FC5247–0AF13–1AA0
1 6FC5248–0AF12–0AA0
1 6FC5248–0AF21–0AA0
60 6FC5247-0AA35-0AA0
Amount
30
30
9
1
153