Siemens Sinumerik 828D Manual page 170

Anschließbare Komponenten
7.5 MCP Interface PN
Standard input image
Table 7-59 MCP Interface PN input image
Byte Bit7
EB112 X111.17
EB113 X111.33
EB114 X112.17
EB115 X112.33
EB116 X113.17
EB117 X113.33
EB118 X114.17
EB119 X114.33
EB120 X112.38
EB121 X114.38
EB122 T_Critical
*)
EB123 -
EB124 X55.2
EB125 X41.3
EB126 The current temperature value of the LM77 temperature sensor in degrees Celsius, further information see
EB127
A logical 1 in the appropriate bit means that the associated temperature alarm is present.
*)
Note
Bytes EB126 and EB127
The EB126 and EB127 bytes have significance only when the MCP Interface PN module is
configured as universal component.
The LM77 temperature sensor measures the temperature on the MCP Interface PN module.
The temperature is represented as integer value.
Range of values: -25° C to 100° C
Table 7-60
Temperature in °C
65
36
0
-1
-5
170
Bit6 Bit5
X111.15 X111.13
X111.31 X111.29
X112.15 X112.13
X112.31 X112.29
X113.15 X113.13
X113.31 X113.29
X114.15 X114.13
X114.31 X114.29
X112.37 X112.36
X114.37 X114.36
T_High T_Low
*) *)
- -
X55.1 X52.3
X41.2 X41.1
Identifier for the 'MCP Interface PN' module is 0x8D
Temperature representation examples
Bit4 Bit3
X111.11 X111.9
X111.27 X111.25
X112.11 X112.9
X112.27 X112.25
X113.11 X113.9
X113.27 X113.25
X114.11 X114.9
X114.27 X114.25
X112.35 X111.38
X114.35 X113.38
X30.6 X30.7
X31.6 X31.7
X52.2 X52.1
X40.3 X40.2
below
Representation in byte EB126
0x41
0x20
0x00
0xFF
0xFB
Bit2 Bit1
X111.7 X111.5
X111.23 X111.21
X112.7 X112.5
X112.23 X112.21
X113.7 X113.5
X113.23 X113.21
X114.7 X114.5
X114.23 X114.21
X111.37 X111.36
X113.37 X113.36
X30.8 X30.9
X31.8 X31.9
X51.3 X51.2
X40.1 -
PPU and components
Manual, 05/2015, 6FC5397-2DP40-3BA4
Bit0
X111.3
X111.19
X112.3
X112.19
X113.3
X113.19
X114.3
X114.19
X111.35
X113.35
X30.10
X31.10
X51.1
X55.3