Connecting The Remote Control Unit - Sony Digital betacam DVW-707 Operation Manual

5-10 Connecting the Remote
Connecting the RM-B150 or RM-P9 Remote Control Unit (not supplied)
enables remote control of the principal camera functions.
Turning the POWER switch of the camcorder to ON when the Remote
Control Unit is connected to the REMOTE connector (8 pin),
automatically puts the camcorder into remote control mode. If you
disconnect the Remote Control Unit, remote control mode is canceled.
RM-B150
5
Remote control cable (10 m) (about 33 ft),
supplied with RM-B150
Note
To connect the RM-P9 to the camcorder, you need the CCA-86-0.4 cable
(not supplied) besides the remote control cable supplied with RM-P9.
5-42
Chapter 5 Setting Up the Camcorder
Control Unit
Remote
connector

Connecting the remote control unit

REMOTE