Attaching A Uhf Portable Tuner (For A Uhf Wireless Microphone System) - Sony Digital betacam DVW-707 Operation Manual

Digital betacam camcorder
Hide thumbs Also See for Digital betacam DVW-707:
Table of Contents

Advertisement

5-5-3 Attaching a UHF Portable Tuner (for a UHF
Wireless Microphone System)
To use a Sony UHF wireless microphone system, fit one of the following
UHF portable tuners:
• WRR-28M/810A/860A UHF Portable Tuner
For each of these UHF portable tuners, use the following attachment
procedure. (For the WRR-28M/810A/860A UHF Portable Tuner, the
WRR-28M is taken as an example.)
Refer to the UHF portable tuner manual for more information.
Fitting a WRR-28M (using a BP-L60A/L90A Battery
5
Pack)
1
(1) Attach the WRR tuner fitting (not supplied, service part number
A-8278-057-A) to the back of the camcorder.
1 Pass a screwdriver through the holes and tighten the screws.
2 Loosen the adjustment screws.
3 Adjust the metal fitting position for a BP-L60A/L90A
4 Attach the BETACAM holder kit supplied with the tuner to
(2) Attach the battery pack.
For more information about attaching the BP-L60A/L90A Battery Pack, see
Section 5-1-1 "Using a BP-L60A/L90A Battery Pack" (page 5-1).
5-28
Chapter 5 Setting Up the Camcorder
Battery Pack to be attached, and tighten the adjustment
screws to fix its position.
the WRR tuner fitting.

Advertisement

Table of Contents
loading

Table of Contents