Chapter 6 Maintenance; Testing The Camcorder Before Shooting; Preparations For Testing - Sony Digital betacam DVW-707 Operation Manual

6-1 Testing the Camcorder
Before Shooting
Check the functions of the camcorder before setting out for a shooting
session, preferably by operating the camcorder together with a color
video monitor.

6-1-1 Preparations for Testing

Follow the procedure below.
1
Load a fully charged battery pack.
2
Set the POWER switch to ON, and check that the HUMID indicator
does not appear and that the BATT indicator shows at least five
segments. When using a BP-L60A/L90A Battery Pack, check that
the four LED indicator segments on the battery pack are lit.
• If the HUMID indicator appears, wait until it disappears.
• If the BATT indicator does not show at least five segments,
replace the battery pack with a fully charged one.
3
Check that there are no obstructions near the cassette lid, then press
the EJECT button to open the cassette lid.
3
Preparations for testing
4 1
2

Chapter 6 Maintenance

6
(Continued)
6-1