Selecting The Test Output - Sony Digital betacam DVW-707 Operation Manual

F.SHT: (Only when the BKDW-705 is installed) Assigns the
ON or OFF function for the frame shutter.
Notes
• When a remote control unit is connected to the camcorder, the
settings of the FILTER INH. and the IRIS OVERRIDE cannot be
changed from the remote control unit. These items appear on the
menu, but the cursor skips them so that they cannot be selected.
• Pushing the MENU CANCEL/PRST/ITEM switch to
CANCEL/PRST has no effect on the FUNCTION 2/2 page.
To change the setting of another function, return to step 3.
6
Press the rotary encoder, so that the question mark disappears.
7
To end the menu operation, set the MENU ON/OFF/PAGE switch to
OFF.
The setup menu disappears from the viewfinder screen and the
displays indicating the current status of the camcorder appear along
the top and bottom of the viewfinder.

4-9-3 Selecting the Test Output

Use the TEST OUT page of the setup menu to select the type of video
signal to be output from the TEST OUT connector.
Follow the procedure below to select the test output signal.
Chapter 4 Adjustments and Settings for Recording
4
(Continued)
4-83