Low Water Alarm; Water Level Indicator Light - Honeywell ES800 User Manual

USE & OPERATION (CONTINUED)
FILLING WITH WATER & ICE (CONTINUED)
AUTO-OFF SAFETY SYSTEM
This unit is equipped with an Auto-Off Safety System. When the water tank is detached from the unit
or if the tank is incorrectly positioned, the air cooler will turn off automatically. To restart the cooler,
the tank must be attached to the unit correctly.

LOW WATER ALARM*

The unit is equipped with a low water sensor. In Cooling Mode, when water in the tank is below the
minimum level, you will hear a beeping sound and the indicator light will flash continuously. The unit
will automatically pause evaporative cooling.
Refill the water tank to deactivate the alarm in cooling mode. First switch OFF the unit and unplug
from the power outlet. Fill the water tank with water above the minimum water level mark. Plug in and
switch ON again.
To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), switch
the unit OFF and then ON again. The Low Water Alarm will not activate in Fan only mode. The Low
Water Alarm will sound again if the COOL function is activated while the water tank is still empty.

WATER LEVEL INDICATOR LIGHT

When the unit turns on, the water level indicator located at the front of the water tank will light up
to produce an elegant glow. This can be convenient as a night light during the night. This light will
remain on for as long as the air cooler is turned on.
*Applicable for models with low water alarm feature only.
EN 6