USER TIPS What is Evaporative Cooling? Honeywell Evaporative Air Coolers are built to maximize energy efﬁciency and keep energy costs low. Warm air is drawn into the cooler and enters the Honeycomb Cooling Media. Water pumped from the water tank pours over the Honeycomb Cooling Media. As the warm air passes through the Honeycomb Cooling Media, the water absorbs the heat, naturally cooling and humidifying the air.
• Set the unit on a solid ﬂat surface. IMPORTANT: Honeywell Outdoor Air Cooler models are designed to IPX4 product standards and not recommended to be placed outdoors during heavy rain or snow. SAFETY RULES WARNING—READ AND SAVE THE AIR COOLER GUIDE AND USER MANUAL...
Coil the power cord and store it away from the ﬂoor to protect it. *Carbon Dust Filter is available in speciﬁc models of Honeywell Air Coolers only. Check the User Manual for your model to see if it includes a Carbon Dust Filter.
TROUBLESHOOTING GUIDE Customer Service Center: See the last page of the User Manual to ﬁnd the contact details for the Customer Service Center for your area. PROBLEM POSSIBLE CAUSE SOLUTION No discharge of air. Cord is not plugged in. Make sure power cord is plugged in and the switch is Power is not ON.
Portable Evaporative Air Cooler User Manual Read and save these instructions before use www.jmatek.com Model: CO301PC E-mail: email@example.com...
PARTS DESCRIPTION (10) (11) (12) (13) (16) (14) (15) 1) Touch Screen Control Panel 7) Water Inlet Valve 13) Power Cord Wrap 2) Louvers 8) Water Level Indicator 14) Overﬂow Hole 3) Front Grill 9) Beverage Can Holders 15) Drain Plug 4) Front Honeycomb Cooling Pad 10) Top Storage Compartment 16) Power Cord &...
USE & OPERATION (CONTINUED) FUNCTION BUTTONS (CONTINUED) COOL Touch the COOL button until it is illuminated on the display screen. This activates evaporative cooling. The water pump will operate and you will feel the cooler air after the Honeycomb Cooling Media is completely wet.
USE & OPERATION (CONTINUED) FILLING WITH WATER (CONTINUED) When the connection is secured, turn ON the water supply and the water will ﬂow into the water tank of the cooler. The cooler is now set so the water reﬁlls automatically when the water tank is empty, or when the water reaches below a minimum level.
USE & OPERATION (CONTINUED) CLEANING THE HONEYCOMB COOLING MEDIA The appliance is supplied with two Honeycomb Cooling Media pads. The Honeycomb Cooling Media are located inside the Front & Rear Grills. See Step 1 to Step 5 for instructions on how to remove them from the unit for cleaning and maintenance. Do not run the unit in COOL mode with stale water in the tank.