Sony Digital Video Camera Recorder Applications page 41

Symptom
The image does not appear on
ImageMixer Ver.1.5 for Sony
when using the USB cable.
Cause and/or Corrective Actions
cThe USB driver has been registered incorrectly as the computer
was connected to your camcorder before the installation of the
USB driver was completed. Follow the procedure below to
install the USB driver correctly.
For Windows 98*/Windows 98SE/Windows Me
* When copying or playing the pictures on a tape using a computer, the
operation is not guaranteed on Windows 98.
1
Check that your camcorder is connected to a computer.
2
Right-click [My Computer], then click [Properties].
The [System Properties] screen appears.
3
Click the [Device Manager] tab.
4
If other devices below are already installed, right-click
them, then click [Remove] to delete them.
For copying and viewing pictures recorded on a
tape
• [USB Audio Device] in the [Sound, video and game
controllers] folder
• [USB Device] in the [Other devices] folder
• [USB Composite Device] in the [Universal Serial Bus
Controller] folder
For copying and viewing pictures recorded on a
"Memory Stick"
• [? Sony Handycam] or [? Sony DSC] with a "?" mark in the
[Other devices] folder
5
When the [Confirm Device Removal] screen appears,
click [OK].
6
Turn off the power of your camcorder, disconnect the
USB cable, then restart the computer.
7
Re-install the USB driver (p. 8).
Note
b
• Deleting anything other than [USB Audio Device], [USB Device], [USB
Composite Device], [? Sony Handycam] and [? Sony DSC] may cause
malfunction of your computer.
,continued ,continued
Additional information
41