Recording A Still Image From Other Equipment - Sony Handycam DCR-VX2100 Operating Instructions Manual

Recording an image from a tape as a still image
Titles that are already recorded on tapes
You cannot record the titles on a "Memory Stick."
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.

Recording a still image from other equipment

(1) Set the POWER switch to VCR on your camcorder and set DISPLAY in
LCD in the menu settings.
(2) Play back the recorded tape, or turn the TV on to see the desired program.
The picture from the other equipment appears on the LCD screen or in the
viewfinder.
(3) Follow steps 3 and 4 on page 128.
When recording an image through the VIDEO jack
: Signal flow
Connect the yellow plug of the A/V connecting cable supplied with your camcorder to
the video output jack on the VCR or the TV.
Connect using an S video cable (optional) to obtain high-quality pictures
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks of both your camcorder and the
VCR/TV.
This connection produces higher quality DV format pictures.
S VIDEO
S video cable (optional)
VIDEO
A/V connecting cable
(supplied)
OUT
S VIDEO
VIDEO
to
129