Charging Time; Recording Time - Sony Handycam DCR-VX2100 Operating Instructions Manual

Step 1 Preparing the power supply
Until your camcorder calculates the actual remaining battery time
"- - - - min" appears in the display window.
While charging the battery pack, no indicator appears or the indicator flashes in
the display window in the following cases:
– The battery pack is not installed correctly.
– The AC Adaptor is disconnected.
– Something is wrong with the battery pack.
When using the AC Adaptor
Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug from
the wall outlet.

Charging time

Battery pack
NP-F330 (supplied)
NP-F550
NP-F730/F750
NP-F960
Approximate minutes to charge an empty battery pack

Recording time

Battery pack
NP-F330 (supplied)
NP-F550
NP-F730
NP-F750
NP-F960
Approximate minutes of recording time when you use a fully charged battery
Numbers in parentheses "( )" indicate the time using a normally charged battery.
You cannot use the NP-500/510/710 battery pack on your camcorder.
* Approximate minutes when recording while you repeat recording start/stop,
zooming and turning the power on/off. The actual battery life may be shorter.
Full charge (Normal charge)
150 (90)
210 (150)
300 (240)
420 (360)
Recording with
the viewfinder
Continuous Typical*
75 (65) 40 (35)
150 (135) 80 (75)
265 (240) 145 (130)
315 (275) 175 (150)
575 (515) 320 (285)
Recording with
the LCD screen
Continuous Typical*
60 (55) 30 (30)
130 (115) 70 (60)
230 (205) 125 (110)
265 (235) 145 (130)
480 (430) 265 (240)
11