Indicators Displayed During Recording - Sony Handycam DCR-VX2100 Operating Instructions Manual

Recording a picture
Using the disital zoom – Zoom greater than 12×
Zoom greater than 12× is performed digitally, if you set D ZOOM to 24× or 48× in the
menu settings. The digital zoom function is set to OFF as a default setting (p. 109). If
you use the digital zoom function, the picture quality deteriorates.
The right-ended portion of the bar shows the digital
zooming zone.
The digital zooming zone appears when you set
D ZOOM to 24× or 48×.
You cannot use the digital zoom:
– When you set PROG. SCAN to ON in the menu settings (p. 109).
– When the POWER switch is set to MEMORY.

Indicators displayed during recording

The indicators are not recorded on the tapes.
[a] [b] [c] [d]
40
JUL 4 2003
[j]
[a] Remaining battery time
This appears after you turn on the power and wait for a while.
[b]Cassette memory
This appears when using a tape with cassette memory.
[c] Recording mode
[d]STBY/REC
[e] Time code/Tape counter
[f] Remaining tape
This appears after you insert a cassette.
[g]Guide frame
[h]ND filter
This flashes when the ND FILTER selector should be set. After you have set the ND
FILTER selector, the ND FILTER position selected is indicated. (When the ND OFF
position is selected, the indication disappears.)
[i] Time
The time is displayed about five seconds after the POWER switch is set to CAMERA
or MEMORY.
[j] Date
The date is displayed about five seconds after the POWER switch is set to CAMERA
22
or MEMORY.
min 0:00:01
REC
45min
ND 1
12:05:56PM
[i]
[e]
[f]
[g]
[h]
W
T