Sony Handycam DCR-VX2100 Operating Instructions Manual page 100

Superimposing a title
(5) Press the SEL/PUSH EXEC dial again to complete the setting.
If you set the write-protect tab to lock
You cannot superimpose or erase the title. Slide the write-protect tab to release the write
protection.
To use a custom title
If you want to use the custom title, select
If the tape has a blank portion
You cannot superimpose a title on that portion.
If the tape has a blank portion in the middle of the recorded parts
The title may not be displayed correctly.
The titles superimposed with your camcorder
•They are displayed only on the DV
function.
•The point you superimposed the title may be detected as an index signal when
searching a recording with other video equipment.
To not display titles
Set TITLE DSPL to OFF in the menu settings (p. 109).
100
In playback, playback pause, or recording mode:
The "TITLE SAVE" indicator appears on the screen for five seconds and the
title is set.
In standby mode:
The "TITLE" indicator appears. When you press START/STOP to start
recording, "TITLE SAVE" appears on the screen for five seconds and the title
is set.
in step 2.
format video equipment with the index titler