Sending A Still Image (Dcr-Trv80/Trv80E Only); Receiving A Still Image (Dcr-Trv80/Trv80E Only) - Sony DCR-TRV80 Network Function Operating Instructions Manual

Messages
Sending a still image
– DCR-TRV80/TRV80E only
Message
Input at Least One Letter
Send Error
Unknown device
Receiving a still image
– DCR-TRV80/TRV80E only
Message
Input at Least One Letter
Error Receiving
Cause and/or Corrective Actions
Enter the passkey between one to 16 characters.
• Disconnected from the connected Bluetooth device.
c After confirming the connection to the Bluetooth device, send the
still image again.
• The radio waves between your camcorder and the connected device
were blocked while sending a still image.
c Confirm the radio wave status, and send the still image to the
device again.
• The distance between your camcorder and the connected device
become too far to communicate each other while sending a still
image.
c The distance that your camcorder and the connected device is
within about 10 m (33 feet). Put your camcorder and the connected
device within the distance that they can communicate each other.
During search for a Bluetooth device, [Cancel] was tapped.
c Search for Bluetooth devices again.
Cause and/or Corrective Actions
Enter the passkey between one to 16 characters.
• Disconnected from the connected Bluetooth device.
c After confirming the connection to the Bluetooth device, receive the
still image again.
• The radio waves between your camcorder and the connected device
were blocked while receiving still images.
c Confirm the radio wave condition, and receive the still image to the
device again.
• The distance between your camcorder and the connected device
become too far to communicate each other while receiving still
images.
c The distance that your camcorder and the connected device is
within about 10 m (33 feet). Put your camcorder and the connected
device within the distance that they can communicate each other.
105
-GB